All About Garage Door Repair Journal News

Garage Door Repair | Tips For Repairs To Your Garage Door

Dec 15


A garage door is an essential part of your home and needs to be in good repair to ensure its safe and efficient use. If you notice any of the following signs that your garage door is not functioning correctly, get in touch with a garage door repair professional as soon as possible: the door does not close or open evenly, the moving parts are not lubricated properly, or the cables or rollers are not in good condition. By following these simple tips, you’ll be able to get your garage door back up and running as quickly and efficiently as possible!


Read Post


Lubricate moving Parts

Garage door repair can be daunting, but it can be relatively easy with the right tips. Before making any repairs or adjustments, lubricate the moving parts. This will help reduce the chance of friction and wear on the system. Choose a light oil or grease compatible with the garage door opener’s motor type. And last but not least, be careful not to over-lubricate – this can cause damage instead of repair!

Lubricate moving parts with a lubricant specifically designed for garage doors. This will help reduce the chance of further malfunctions and keep your door running smoothly.

Regularly clean and lubricate the moving parts with a quality lubricant. This will help reduce wear and tear on the system and prolong its life.

Here are some tips for lubricating your garage door:

-Wipe all surfaces that contact the moving parts with a dry cloth or paper towel first.

-Use an appropriate lubricant designed for garage doors regularly (usually once a week). Lubricants explicitly made for this purpose are more effective than general automotive grease.

-Make sure the lubricant is applied evenly and liberally, using a rag or sponge if necessary. Don’t use excessive force – overapplication can cause damage

True Garage Door Car Service

Ensure the Garage Door is Balanced

Keeping your garage door in good working order is essential to ensure safety and security. To do this, first, make sure the door is balanced correctly. Next, check the cables and make sure they’re tight but not too tight. Contact a professional installer if there are any problems with the cable or the balance. Regularly lubricate and adjust the rollers and guides to keep them operating smoothly.

garage doors

Clear the Tracks

Clear the tracks every time you open or close the door. This will prevent debris from getting stuck between the Tracks and moving up along the cables, which can cause them to break or wear out prematurely.

One of the first things you should do if you are experiencing issues with your garage door is clear the tracks. This means removing debris that may have gotten stuck between the rollers and improperly opening/closing the system. Doing this will prevent further damage and increase your chances of resolving whatever issue was causing trouble in the first place.

Check the Cables

Garage door repair isn’t as difficult as you might think many repairs can be done relatively quickly if you know where to look. First and foremost, ensure the cables are tight by pulling on both ends of the cable closest to the opener. If you notice any rust or corrosion on the line, it’s time for a new one! Also, check if dirt or debris is blocking gears or rollers inside the garage door. If the garage door opener isn’t working correctly, repair it by following the tips above. If the repair still doesn’t seem to work the way it should consult a professional. But don’t be afraid to try these tips- they might help you fix your garage door without having to call a repairman! This simple repair can help ensure that your door opens and closes smoothly, preventing potential problems down the road.

Here are some tips for checking cables: 

– Check all cables for wear or fraying. If any of them seem in bad shape, replace them with new ones. 

– Compare the cable lengths to make sure they’re both equal. The shortest cable should be at the opener, and the longest one should go to the wall near where you want your door to open/close. 

– Adjust each cable until its length matches what’s specified in Step



Visit Us



Replace the Rollers

Garage door problems are the bane of many homeowners’ existence. The rollers are likely the culprit if your garage door is not opening and closing correctly. To replace the rollers, remove the cover by unscrewing it from the back of the door. Once the cover is removed, remove each roller and place them in a plastic bag to protect them during transport. Next, follow the manufacturer’s instructions to replace the rollers with new ones. By doing this, you will ensure that your garage door is working correctly once again!

This is one of the most common repairs due to misuse or neglect. Over time, the rubber will wear down and become stretched out, which causes friction against the tracks and cause noises and problems when opening or closing your door. Replacing all four rollers should fix most issues. 

White Colored Garage Door


Garage door repairs are often the solution to many problems, from not being able to open the door to the door not closing correctly. Following the tips in this blog, you can ensure that your garage door repair is quick and easy. Additionally, ensure that the garage door is properly lubricated and that the moving parts are balanced before the repair. Lastly, clear the tracks and check the cables before replacing the rollers.

At True Garage Door LLC, we provide the best garage door repair services in the area. We have the expertise and the equipment to take on any repair job, big or small. In Rhode Island and the surrounding areas, we are the garage door repair company you can trust.


Find Us Here!


Things To Do in West Warwick, RI

West Warwick, RI News